Description

ACDelco Gold (Professional) Remanufactured Friction Ready Disc Brake Calipers are the high quality alternative to Original Equipment (OE) parts. They use both aluminum and iron castings. These loaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. ACDelco Professional Remanufactured Friction Ready Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand. Bleeder screws, copper sealing washers, hardware, and mounting brackets are all included for easy installation. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. Pressure tested to ensure safe and confident braking Cast iron and aluminum specifications, no extra stress on the brake boosting mounting Developed without attached brake pads for customization

• Specifications

  • Piston Quantity: 2
  • Caliper Piston Quantity: 2
  • Disc Brake Caliper Casting Material: Cast Iron
  • Length (in): 14 in
  • Width (in): 7.38 in
  • Length (in): 14
  • Inlet Fitting Type: Female
  • Caliper Color: Natural
  • Anti-Rattle Spring Included: No
  • Piston 2 Diameter (in): 2in
  • Bleeder Screw Thread Diameter (mm): 10
  • Mounting Bolt Thread Pitch (mm): 2.000
  • Caliper Type: Floating
  • Pads Included: No
  • Mounting Hardware Included: Yes
  • Inlet Thread Diameter (in): 0.394
  • Width (in): 7.38
  • Bleeder Screw Thread Diameter (mm): 10 mm
  • Piston 1 Diameter (in): 2in
  • Piston 1 Diameter (mm): 50.8mm
  • Inlet Thread Diameter (mm): 10 mm
  • Mounting Bracket Included: Yes
  • Height (in): 6.62
  • Caliper Slides Included: Yes
  • Mounting Bolt Thread Pitch (mm): 2.000 mm
  • Abutment Clips Included: Yes
  • Casting Material: Cast Iron
  • Mounting Hole Diameter: 14 IN
  • Pad Wear Sensor Included: No
  • Programming Required: No
  • Inlet Thread Diameter (mm): 10
  • Finish: Plain
  • Height (in): 6.62 in
  • Grade Type: Performance
  • Piston 2 Diameter (mm): 50.8mm
  • Inlet Thread Diameter (in): 0.394 in
  • Bleeder Thread Diameter: M10x1.5

• Product Fits

  • Cadillac Escalade 2002-2006
  • Cadillac Escalade ESV 2003-2006
  • Cadillac Escalade EXT 2002-2006
  • Chevrolet Astro 2003-2005
  • Chevrolet Avalanche 1500 2002-2006
  • Chevrolet Avalanche 2500 2002-2006
  • Chevrolet Express 1500 2003-2008
  • Chevrolet Express 2500 2003-2006
  • Chevrolet Silverado 1500 1999-2006
  • Chevrolet Silverado 1500 Classic 2007-2007
  • Chevrolet Silverado 1500 HD 2001-2006
  • Chevrolet Silverado 1500 HD Classic 2007-2007
  • Chevrolet Silverado 2500 1999-2004
  • Chevrolet Silverado 2500 HD 2001-2010
  • Chevrolet Silverado 2500 HD Classic 2007-2007
  • Chevrolet Silverado 3500 2004-2007
  • Chevrolet Silverado 3500 Classic 2007-2007
  • Chevrolet Silverado 3500 HD 2007-2010
  • Chevrolet Suburban 1500 2000-2006
  • Chevrolet Suburban 2500 2000-2013
  • Chevrolet Tahoe 2000-2006
  • GMC Safari 2003-2005
  • GMC Savana 1500 2003-2008
  • GMC Savana 2500 2003-2006
  • GMC Sierra 1500 1999-2006
  • GMC Sierra 1500 Classic 2007-2007
  • GMC Sierra 1500 HD 2001-2006
  • GMC Sierra 1500 HD Classic 2007-2007
  • GMC Sierra 2500 1999-2004
  • GMC Sierra 2500 HD 2001-2010
  • GMC Sierra 2500 HD Classic 2007-2007
  • GMC Sierra 3500 2004-2006
  • GMC Sierra 3500 Classic 2007-2007
  • GMC Sierra 3500 HD 2007-2010
  • GMC Yukon 2000-2006
  • GMC Yukon XL 1500 2000-2006
  • GMC Yukon XL 2500 2000-2013
  • Hummer H2 2003-2009