



Disc Brake Caliper
ACDelco - Gold | 19141223
Front Driver Side Disc Brake Caliper Assembly (Friction Ready Non-Coated)
130,91 € RRP
Excl. VAT
7 in stock
Replaces: | 18FR984 |
---|
Description
ACDelco Gold (Professional) Remanufactured Friction Ready Disc Brake Calipers are the high quality alternative to Original Equipment (OE) parts. They use both aluminum and iron castings. These loaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. ACDelco Professional Remanufactured Friction Ready Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand. Bleeder screws, copper sealing washers, hardware, and mounting brackets are all included for easy installation. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. Pressure tested to ensure safe and confident braking Cast iron and aluminum specifications, no extra stress on the brake boosting mounting Developed without attached brake pads for customization
-
Specifications
- Disc Brake Caliper Casting Material: Cast Iron
- Pads Included: No
- Inlet Thread Diameter: 0.375 IN
- Pad Wear Sensor Included: No
- Finish: Plain
- Width (in): 6.7
- Bleeder Thread Diameter: 3/8"-24
- Programming Required: No
- Bleeder Screw Thread Diameter: 0.375 IN
- Height (in): 6.7
- Inlet Fitting Type: Female
- Caliper Piston Quantity: 1
- Length (in): 9.5
- Casting Material: Cast Iron
- Piston 1 Diameter (in): 2.6in
- Piston 1 Diameter (mm): 66mm
- Width (in): 6.7 in
- Caliper Slides Included: Yes
- Grade Type: Performance
- Mounting Bracket Included: No
- Mounting Hardware Included: Yes
- Piston Quantity: 1
- Caliper Color: Natural
- Height (in): 6.7 in
- Caliper Type: Floating
- Inlet Thread Diameter: 9.53 MM
- Length (in): 9.5 in
-
Product Fits
- Jeep Cherokee 1990-2001
- Jeep Comanche 1990-1992
- Jeep Grand Cherokee 1993-1998
- Jeep Grand Wagoneer 1993-1993
- Jeep TJ 1997-2006
- Jeep Wagoneer 1990-1990
- Jeep Wrangler 1990-2006
Alternative products

Brake Master Cylinder
Dorman - First Stop | DORM105876
Brake Master Cylinder
3 in stock
143,90 €
RRP
143,90 €
RRP
ROTOR,FRT BRK
ACDELCO | 19176764
Order item
101,15 €
RRP
101,15 €
RRP
CALIPER DISC BRAKE FRONT LH
MOPAR | 5252985
CALIPER
Order item
468,76 €
RRP
468,76 €
RRP
CONTROL
MOPAR | 52104113
HYD CTRL
Order item
491,30 €
RRP
491,30 €
RRP
Brake Master Cylinder
CARDONE | CDO10-2409
Remanufactured
Order item
87,13 €
RRP
87,13 €
RRP
PIPE
MOPAR | 52008675AC
LINE
Order item
170,54 €
RRP
170,54 €
RRP
CALIPER ASM,FRT BRK (W/ BRK PADS) (REMAN)
ACDELCO | 19424266
Order item
201,16 €
RRP
201,16 €
RRP
ROTOR ASM,FRT BRK
ACDELCO | 19245461
Order item
123,51 €
RRP
123,51 €
RRP
Brake Master Cylinder
CARDONE | CDO10-1896
Remanufactured
Order item
70,73 €
RRP
70,73 €
RRP
Master Cylinder
CARDONE | CDO13-2409
Order item
93,56 €
RRP
93,56 €
RRP

Clutch Hydraulic Line
Dorman - OE Solutions | DOR628-300
Hydraulic Clutch Line
Order item
169,09 €
RRP
169,09 €
RRP