Disc Brake Caliper

ACDelco - Gold | 19141223

Front Driver Side Disc Brake Caliper Assembly (Friction Ready Non-Coated)

130,91 € Rek. pris

Exkl. moms

7 i lager

Ersätter: 18FR984

Beskrivning

ACDelco Gold (Professional) Remanufactured Friction Ready Disc Brake Calipers are the high quality alternative to Original Equipment (OE) parts. They use both aluminum and iron castings. These loaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. ACDelco Professional Remanufactured Friction Ready Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand. Bleeder screws, copper sealing washers, hardware, and mounting brackets are all included for easy installation. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. &#9888,<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov Pressure tested to ensure safe and confident braking Cast iron and aluminum specifications, no extra stress on the brake boosting mounting Developed without attached brake pads for customization

  • Specifikationer

    • Width (in): 6.7 in
    • Height (in): 6.7 in
    • Inlet Thread Diameter (in): 0.375 in
    • Inlet Thread Diameter (in): 0.375
    • Bleeder Screw Thread Diameter (in): 0.375 in
    • Bleeder Screw Thread Diameter (in): 0.375
    • Programming Required: No
    • Casting Material: Cast Iron
    • Length (in): 9.5
    • Piston 1 Diameter (in): 2.6in
    • Inlet Thread Diameter (mm): 9.53 mm
    • Bleeder Thread Diameter: 3/8"-24
    • Width (in): 6.7
    • Length (in): 9.5 in
    • Piston 1 Diameter (mm): 66mm
    • Finish: Plain
    • Inlet Thread Diameter (mm): 9.53
    • Height (in): 6.7
    • Caliper Piston Quantity: 1
  • Passar på

    • Jeep Cherokee 1990-2001
    • Jeep Comanche 1990-1992
    • Jeep Grand Cherokee 1993-1998
    • Jeep Grand Wagoneer 1993-1993
    • Jeep TJ 1997-2006
    • Jeep Wagoneer 1990-1990
    • Jeep Wrangler 1990-2006

Alternativa produkter

Disc Brake Caliper

CARDONE | CDO18-4340

Remanufactured

Ersätter:
18-4340

10 i lager

131,32 €

131,32 €

143,90 €

CLUTCH SLAVE CYLINDER

DORMAN | DORCS360047

0

Ersätter:
SC142216, WAGSC142216

1 i lager

173,46 €

173,46 €

ROTOR,FRT BRK

ACDELCO | 19176764

Ersätter:
18A712, 18028312
ETD:
61-77 arbetsdagar 15-20 arbetsdagar

Beställningsvara

101,15 €

101,15 €

MASTER CYLINDER ASY

FORD | F57Z7A543A

Beställningsvara

195,60 €

195,60 €

Brake Master Cylinder

CARDONE | CDO10-2409

Remanufactured

ETD:
70-96 arbetsdagar 15-20 arbetsdagar

Beställningsvara

87,13 €

87,13 €

CALIPER ASM,FRT BRK (W/ BRK PADS) (REMAN)

ACDELCO | 19424266

Ersätter:
18R984, 18036173
ETD:
61-77 arbetsdagar 15-20 arbetsdagar

Beställningsvara

201,16 €

201,16 €

ROTOR ASM,FRT BRK

ACDELCO | 19245461

Ersätter:
18021772, 18021389, 19122178
ETD:
61-77 arbetsdagar 15-20 arbetsdagar

Beställningsvara

123,51 €

123,51 €

Brake Master Cylinder

CARDONE | CDO10-1896

Remanufactured

ETD:
70-96 arbetsdagar 15-20 arbetsdagar

Beställningsvara

70,73 €

70,73 €

Master Cylinder

CARDONE | CDO13-2409

ETD:
70-96 arbetsdagar 15-20 arbetsdagar

Beställningsvara

93,56 €

93,56 €

Clutch Hydraulic Line

Dorman - OE Solutions | DOR628-300

Hydraulic Clutch Line

ETD:
66-77 arbetsdagar 15-20 arbetsdagar

Beställningsvara

169,09 €

169,09 €