Beskrivning

Holley Power Steering Kit for Gen III Hemi Swaps - Late Car - Low Pressure The late-model factory power steering pump on the Mopar Gen III Hemi engines has too much pressure for the steering box on most older muscle cars & trucks. These special Saginaw type II power steering pumps produce the proper pressure, and the pulley is sized to operate the pump at the proper speed when used with the existing drive system on Gen III Hemi engines. The complete kit (part # 97-382) includes the power steering pump with reservoir, mounting plate, hardline adapter, and pulley. Individual replacement parts are also available separately. Fits 2014 & Up Gen III Hemi Engines (5.7L and 6.4L) with "Car Style" Accessory Drive System - Fits Engines with 4.82" Damper Spacing (see drawing). The power steering pulley must be installed using an installation tool that can be rented at most auto parts stores. Incorrect installation of this pulley may damage the power steering pump internals. When installed, the pulley should be flush w/ the end of the pump shaft. 0.88 GPM Low Flow/2.8 GPM High Flow 1200 PSI Mounting bracket bolts onto the engine w/ 3 tapped holes on the front of the left side cylinder head (some vehicles came from the factory with electric power steering and may not have the 3 tapped holes in the front of the cylinder head).

• Specifikationer

  • Inlet Quantity:1
  • Type:Hydraulic
  • Filter Included:No
  • Material:Aluminum
  • Remote Reservoir Included:No
  • Reservoir Included:Yes
  • Pulley Attachment Type:Press-On
  • Emission Code:5
  • Outlet Attachment Type:Banjo
  • Inlet Attachment Type:Barb
  • Outlet Quantity:1
  • Engine:Chrysler Gen III Hemi
  • Reservoir Cap Included:Yes
  • Shaft Type:Press-On
  • Housing Material:Aluminum
  • Remote Reservoir:No
  • Mounting Hardware Included:Yes
  • Warning:California Proposition 65
  • Finish:Cast
  • Pulley Included:Yes
  • Grade Type:Performance
  • Brand:Holley

• Documents and Manuals

  • 1101_HOL97-382.pdf