Beskrivning

Flowmaster American Thunder Crossmember-Back Exhaust System The American Thunder Crossmember-Back exhaust system for the 1966-1967 Ford Fairlane is constructed from 2.50-inch mandrel-bent 16 gauge aluminized steel tubing to maximize the exhaust flow and comes complete with an H-pipe crossover to equalize the exhaust pressures and eliminates backrap on deceleration. The large case Super 50 Series performance mufflers provide a deep powerful sound and maximum performance flowing into the mandrel-bent tailpipes. The Super 50 mufflers also incorporate built-in resonators keeping the interior resonance down to a minimum. The system is finished off with large 3.00-inch angle polished stainless steel tips and includes all necessary parts, hardware and instructions to complete the installation. All aluminized steel exhaust systems are covered by our 3-year Limited Warranty. Fits 1966-1967 Ford Fairlane with V8 engine, does not fit convertibles.

• Specifikationer

  • Single Dual:Dual
  • Outlet Diameter:2.50 IN
  • Exit Style:Dual Out Rear
  • Valve Included:No
  • Emission Code:5
  • Exit Position:Dual Out Rear
  • Inlet Type:Weld-On
  • California Proposition 65 Chemical Name:Nickel (Metallic)
  • Mounting Bracket Included:Yes
  • Category:Exhaust
  • Exhaust Tip Material:304 Stainless Steel
  • Hangers Included:Yes
  • Muffler Quantity:2
  • Exhaust Tip Finish:Polished
  • Exhaust Tip Shape:Round
  • Material:Aluminized Steel
  • Exhaust Series:American Thunder
  • Tip Diameter:3.00 IN
  • Muffler (Left) Type:Chambered
  • Clamping Type:Flat Band
  • Tip Quantity:2
  • Tip Shape:Oval
  • Exhaust Tip Length:13.00 IN
  • System Type:Crossmember-back
  • Pipe Material:Aluminized Steel
  • Muffler Finish:Black High-Temperature Paint Finish
  • California Proposition 65 Required:Yes
  • Warning:California Proposition 65
  • Exhaust Tip Resonated:No
  • Exhaust Tip Edge:Slash Cut
  • Muffler Inlet Connection:Slip-Fit
  • Muffler Outlet Connection:Slip-Fit
  • Muffler Outlet Quantity:1
  • Muffler Inlet Outside Diameter:2.63 IN
  • Finish:Aluminized
  • Muffler Flanged Inlet:No
  • Muffler Type:Chambered
  • Exhaust Tip Intercooled:No
  • Muffler Inlet Inside Diameter:2.50 IN
  • Exhaust Tip Diameter:3.00 IN
  • Product Type:Exhaust System
  • Catalytic Converter Quantity:0
  • Grade Type:Performance
  • part type:Exhaust System Kit
  • Muffler Flanged Outlet:No
  • Muffler (Right) Type:Chambered
  • Clamps Included:Yes
  • Gasket Or Seal Included:No
  • Tail Pipe Tapered Outlet:No
  • Muffler (Left) Body Length:17.00 IN
  • California Proposition 65 Chemical Name:Chromium (hexavalent compounds)
  • Inlet Diameter:2.50 IN
  • Valve Type:Not Included
  • Tail Pipe Outlet Outside Diameter:2.50 IN
  • Muffler (Right) Body Height:5.00 IN
  • Exhaust Tip Connection:Welded
  • Tubing Diameter:2.50 IN
  • Spring Bolt Kit Included:No
  • Muffler (Left) Body Height:5.00 IN
  • Exhaust Tip Cut:Angled
  • Muffler Series:Super 50 Series
  • Muffler Body Shape:Oval
  • Tail Pipe Quantity:2
  • Type:Crossmember-back
  • Exhaust Tip Quantity:2
  • Muffler (Right) Body Width:10.00 IN
  • Heat Shield:No
  • Muffler Part Number:52556
  • Muffler Body Length:17.00 IN
  • Muffler (Right) Body Length:17.00 IN
  • Muffler Body Material:Aluminized Steel
  • Muffler (Left) Body Width:10.00 IN
  • Main Piping Diameter:2.50 IN
  • 2WD/4WD:2WD
  • Sub Category:Exhaust and Tail Pipes
  • Sound Level:Moderate
  • Brand:Flowmaster

• Passar på

  • Ford Fairlane 1966-1967

• Documents and Manuals

  • 1101_FLW17289.pdf