Engine Mount

Hooker BlackHeart | HOKBHS523

Engine Swap Mounts/Kits HKR

263,21 € Rek. pris

Exkl. moms

Beställningsvara

ETD: 66-77 arbetsdagar 15-20 arbetsdagar

Beskrivning

Hooker Blackheart Engine Mounting Brackets Add some serious torque and power to your Jeep Wrangler YJ with a Gen III Hemi Engine Swap. These engine-mounting brackets are one part of a fully engineered swap system that provides maximum component clearances, ideal drivetrain geometry and clearance for swap headers & 3.00" high-tuck exhaust system. These engine mounts work together with the stock skid plate / transmission crossmember to mount the transmission & stock NP231J transfer case. The Gen III Hemi 5.7L factory truck oil pan & accessory drive system are recommended for this swap (these parts come on the donor engine when using the 2003-2008 5.7L Hemi truck engine). The 5.7L truck engine is an ideal engine choice for the Wrangler since it makes torque at a low RPM, right where it is needed for off-road use. 1) Optimized for Use with 2003-2008 Dodge Ram 5.7L Hemi Truck Engine. 2) Fits Jeeps that Came from the Factory with 4 or 6-Cylinder Engines. 3) Body or Suspension Lift is not Required to Install These Mounting Brackets. 4) Designed Specifically for Use with Hooker Blackheart Headers, Y-pipe and Engine Swap Exhaust System for this Application. 5) Additional Hooker Blackheart Parts Required for Installation: BHS514 Engine Mount Clamshell for Gen-3 Hemi (2 required) 71221017HKR (red) or 71221016HKR (black) Poly Engine Mount Inserts (2 required) 71223015HKR Engine Mount Bolt Kit (1 required) Bare Steel, Weld-On Design. Requires Welding & Painting. Use BHS537 with 545RFE Transmission. 46RE Transmission can also be used, but will require a fabricated transmission-mounting bracket to attach it to the skid plate / crossmember.

  • Specifikationer

    • Transmission:46RE, 545 RFE
    • Finish: Raw
    • Warning:California Proposition 65
    • Application: 1987-1995 Jeep Wrangler
    • Engine: Chrysler Gen III Hemi
    • Category: Engine
    • Type of Component:Engine Mount Brackets
    • Sub Category:Cylinder Block Components
    • Material: Steel
  • Passar på

    • Jeep Wrangler 1987-1995
  • Documents and Manuals