Beskrivning

Max-Lift� BSR Shaft Rocker System for Aftermarket LS3-Style Cylinder Heads COMP Cams® expands upon its Max-Lift� BSR Shaft Rocker Systems to include aftermarket LS3-style cylinder heads. This new bolt-in bushed shaft rocker system is specifically designed for aftermarket LS3 heads where valve geometry is different from the stock configuration.By tying all eight rockers onto a single shaft the BSR Series of rockers improves valve train dynamics by increasing valve train stiffness. Replacing the high-Hertz loading needle bearings with tri-layer bushings reduces deflection allowing for increased rigidity and decreased rocker pad wear. The plasma-nitride finish minimizes friction and increases durability while provisions for optional pressurized oiling further improve longevity and performance. The increased valve train stiffness provided by the COMP Cams Max-Lift BSR Shaft Rocker System makes the same camshaft perform like a slightly larger camshaft as more of the lobe lift is transferred directly to the valve train instead of being absorbed by deflection in the cylinder head and single-bolt rocker mounting design. The system will also allow the use of higher-lift more aggressive camshafts before the valve train goes out of control. The Max-Lift BSR Shaft Rocker System ensures the rocker pad and valve tip remains parallel through the contact sweep allowing the rocker to safely sweep up to .675� valve lift. The Max-Lift BSR Shaft Rockers System for aftermarket LS3-style heads will fit RHS 54550 Pro Elite LS3 Edelbrock Victor CNC LS3 Trick Flow 255 LS3 AFR Mongoose LS3 and Mast Black Label LS3.

• Specifikationer

  • Adjustable: No
  • Fulcrum Length:1.56
  • Machining Required:No
  • Quantity: 16
  • Requires Guide Plates:No
  • Rocker Arm Body Style:Slider Tip
  • Rocker Arm Fasteners Included: Yes
  • Rocker Arm Finish: Black Oxide
  • Rocker Arm Material: Steel
  • Rocker Arm Mounting Style:Bolt-down
  • Rocker Arm Pivot:Bushing
  • Rocker Arm Ratio: 1.7
  • Roller Tip:No
  • Self-Aligning:No
  • Shims Included: No
  • Stud Size:8mm
  • Uses Factory Pedestal:Yes