Beskrivning

The Edelbrock #4150 Throttle Body. Victor EFI. 4-Barrel. 4150-Style Mounting Flange. 1.75" Bores. Includes GM-Style Stepper IAC Motor. Satin Finish The Edelbrock #4150 Victor EFI 4-Barrel Throttle Body is the perfect complement for fuel injection systems that are based on the Victor EFI line of intake manifolds. This high-quality satin-finished component is an affordably priced replacement for throttle body #3878. The Victor #4150 Throttle Body has four 1.75-inch throttle bores for a 1 000 CFM flow rating and its 4150-style base flange will fit most of the Edelbrock Victor and Pro-Flo 4 style manifolds or other similar manifolds with a 4150-style square-bore carburetor flange and standard bolt spacing. The Victor EFI Four-Barrel Throttle Body will accept a standard air cleaner with a 5-1/8-inch flange and the assembly includes a Delphi/GM 4-pin stepper-style idle air control (IAC) motor with a GM-style 3-pin throttle position sensor (TPS) and 1-bar GM MAP sensor. Included are multiple vacuum take-offs (3/8 and 1/4 at the front with 3/8 1/4 and 3/16 at the rear and another 3/16 on the passenger side) and a MAP sensor mounting location incorporated on the housing. Precision throttle control is provided by a progressive linkage with provisions for a 700R4-style throttle valve cable. Measurement from base flange to air cleaner flange is 2.53 inches. This Edelbrock-designed throttle body is diecast and fully machined by the supplier prior to assembly with high-quality components at the Edelbrock factory.

• Specifikationer

  • Type:4 Barrel
  • RGL:WARNING: This product can expose you to Lead which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65warnings.ca.gov.
  • Gasket Or Seal Included:Yes
  • Airflow Rate:1000 2L
  • Throttle Body Spacer Finish:N/A
  • Finish:Satin
  • Throttle Body Spacer Included:No
  • Throttle Body Spacer Thickness:N/A
  • Idle Air Control Motor Included:Yes
  • Throttle Body Type:Electronic Fuel Injection
  • Throttle Body Finish:Satin
  • Series:Universal 4150 Style 4-Barrel
  • Throttle Body Spacer Color:N/A
  • Throttle Body Material:Die-Cast Aluminum
  • Venturi Quantity:4
  • Cubic Feet Per Minute Rating:1000 2L
  • Throttle Position Sensor Included:Yes
  • Fuel System Grade:All
  • Throttle Body Spacer Material:N/A
  • Quantity:Sold Individually
  • Fuel System Type:Gas
  • Mounting Hardware Included:Yes
  • Material:Die-Cast Aluminum
  • Bore Diameter:1.75 IN
  • Fuel Injectors Included:No