632CI Big-Block Deluxe
815 HP | 1 035 Nm
Compression Ratio: 11:1
Aluminum Heads
Hydraulic Roller Cam
Forged Crank
Forged Pistons
-
New 632 BBC dressed
. Carburetor:AED or Holley
- Brand:
- BluePrint Engines
- Stock:
-
New BPE, tall deck, 1 piece rear main seal, 4 bolt main, 4.600" bore. Forged crank - 4.750" stroke and Forged 6.635" rods: BPE. Cylinder Heads: Aluminum, 117cc, BPE . Cam: Roller - .698 Int .698 Exh lift, 272 Int 282 Exh duration @ .050, 110 degree
BLOCK
NEW BluePrint Cast Iron Block.
Manufactured and Machined in the USA.
4-Bolt Main.
4.600" Bore.
1-Piece Rear Main Seal.
Mech fuel pump provision: Yes.
Tall Deck (Cyl Deck is Approx .400 taller / wider than oem block).
ROTATING ASSEMBLY
New BluePrint Forged Crankshaft.
4.750" Stroke.
Forged H-beam 6.635" connecting rods.
Forged Pistons.
Internal.
CYLINDER HEADS
BluePrint Aluminum Cylinder Heads -PS8012.
119cc chamber.
2.30" intake/1.88" exhaust valve.
358cc intake/125cc exhaust runners.
Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
Must verify clearance of exhaust, shift linkage, steering components etc. before ordering.
CAM SPECS
Cam Type: Roller.
.698 / .698 Lift.
272 / 282 duration @ .050 - 110 degree LSA.
ALSO INCLUDES
Carburetor.
Aluminum, single plane.
intake manifold.
MSD Pro Billet distributor.
Valve covers, oil pan and timing cover.
spark plugs.
spark plug wires.
Harmonic balancer.
Dyno test results shipped with engine.
Installation
Notes
• Use neutral balance harmonic damper P/N 12551537
• Use internally balanced flexplate P/N 471529 for automatic transmission or flywheel P/N 14085720 for manual transmission (not included)
• Power ratings based on tests with Holley 670-cfm carburetor P/N 19170092 (not included)
• Does not accept Chevrolet Performance roller lifter assemblies
• Not intended for marine applications
• Pre-1986-style 2-piece rear main seal block
• Recommended for use in vehicles with 6,000 GVW or less